Rockwell Automation 6180 Industrial Computers - Manual (Page 147)

Keypad Configuration Utility Software 13–25
Publication 6180-6.0
3. In the text box, backspace to delete the current definition
4. Under Select Mode, select Macro/String
5. In the text box, type DIR C:\
Figure 13- 20
6. Click OK to store the definition and exit the dialog.
To redefine the F6 key to perform the RUN RSPROGRAM <ENTER>
command:
1. Select the key labeled F6.
2. Choose Key Configuration from the Edit menu.
3. In the text box, backspace to delete the current definition
4. Under Select Mode, select Macro/String.
5. In the text box, type RUN RSPROGRAM
Figure 13- 21
INSERT SCREEN CAPTURE HERE
6. Select Enter from the Add New Code list and click the Enter button.
The nonprintable code is inserted in the Text box.