Rockwell Automation 6180 Industrial Computers - Manual (Page 136)

13–14 Keypad Configuration Utility Software
Publication 6180-6.0
2. Choose Set Default Configuration Function Keys from the Edit
menu.
The definitions of the programmable keys are updated:
•
F1-F12 are defined as <F1> - <F12>
•
S1-S12 are defined as <Left Shift+F1> - <Left Shift+F12>
Note:
These are the factory default settings.
To set the default configuration to Alpha keys:
1. Choose Select All Programmable Keys from the Edit menu.
2. Choose Set Default Configuration
_
Alpha (a-z) Keys from the Edit
menu.
The definitions of the programmable keys are updated:
•
F1-F12 are redefined as a – m.
•
S1-S12 are redefined as n – z.
Please note that the key definitions change but the actual keys are not
relabeled with lowercase characters.
To view the definition of a key:
•
select the key and choose Key Configuration from the Edit menu.
•
or click the right mouse button on the key and select Key
Configuration from the popup menu.
• or select Print Preview from the File menu to view all keys.
Setting Configuration of Programmable Keys
(96-Key Full Alphanumeric Keypad)
On a full alphanumeric keypad, you can set the default configuration of
the programmable keys to the definitions listed below.
•
Function Keys F1 - F10 and F11 - F20