Rockwell Automation 6180 Industrial Computers - Manual (Page 146)

13–24 Keypad Configuration Utility Software
Publication 6180-6.0
•
To insert a nonprintable code in the text, select the code from the
Add New Code list and then click Enter. The nonprintable code is
inserted in the text with brackets.
1. Under Select Mode, select Macro/String or Make/Break Typematic.
2. Click OK to save the definition and close the dialog.
To save the new key code definitions to KIC flash memory, use the Store
Keypad Configuration Command on the File menu.
Examples of Editing Key Definitions
To redefine the F1 key as <Ctrl+Win+F> which is the Find Computer
function in Windows:
Figure 13- 18
INSERT GRAPHIC OF 12 AND 15 INCH SCREEN.
1. Select the key labeled K1.
2. Choose Key Configuration from the Edit menu.
Or click the right mouse button on the key and choose Key
Configuration from the popup menu.
3. In the text box, backspace to delete the current definition.
4. Under Select Mode, select Make/Break Typematic.
5. Select ’f’ from the Add New Code list.
6. Under Left, select the Ctrl check box, then the Win check box.
7. Click the Enter button to display the new definition.
Figure 13- 19
INSERT SCREEN CAPTURE HERE
8. Click OK to store the definition and exit the dialog.
To redefine the F12 key to perform a DIR C:\ command:
1. Select the key labeled K12.
2. Choose Key Configuration from the Edit menu.
Or click the right mouse button on the key and choose Key
Configuration from the popup menu.