Rockwell Automation 6180 Industrial Computers User Manual
Page 97
Advertising
Adding and Removing Removable Media
7–7
Publication 6180-6.0
4. Connect the cable connectors to the floppy drive. Connectors are
keyed so they cannot be installed backwards.
5. Align the floppy drive/bracket (or CD-ROM) and chassis mounting
holes and secure them with the 4 mounting screws provided with the
bracket (or CD-ROM). Tighten screws to a torque of 6–8 in. lbs
(.7–.9 N•m).
Figure 7- 6
6. Swing the chassis back onto the bezel and secure chassis with the
three latching screws. Tighten screws to a torque of 18–22 inch lbs
(2–2.5 N•m).
7. Install the back panel. See page 4-2.
Advertising