Rockwell Automation 6180 Industrial Computers - Manual (Page 130)

13–8 Keypad Configuration Utility Software
Publication 6180-6.0
To run the KCU Utility:
1. For computers running Windows 95 or Windows NT:
a. Click once on the Start button. Place the cursor over Programs.
You will see the Programs submenu.
b. Place the cursor over Keypad Configuration Utility.
c. Click on the icon.
2. The Keypad Configuration Utility opens and shows the current
keypad configuration stored on the KIC card. Depending on the
computer type, the keypad configuration will be 64 key, 69 key, 70
key standard or full alphanumeric.
The window that contains the keypad configuration stored on the KIC
card is named KIC Keypad Configuration.
Figure 13- 3
You can now:
•
modify the keypad configuration stored on the KIC card
•
modify the keypad configuration and save it under a new .KEY file
name
•
open and modify an existing keypad configuration (.KEY) file
•
open an existing firmware file (*.BOO or *.APP).
Using the KCU Utility