Rockwell Automation 6180 Industrial Computers - Manual (Page 141)

Keypad Configuration Utility Software 13–19
Publication 6180-6.0
enter nonprintable characters from the Add New Code list. Use
Backspace to remove existing codes and correct typing errors.
Select Mode
Displays the current mode for a selected programmable key. Select
Macro/String or Make/Break Typematic to enable a mode.
In Macro/String mode, all Make and Break key codes are sent as a
single string when the key is first pressed.
Figure 13- 14
In Make/Break Typematic mode, the Make codes are sent when the key
is first pressed and the Break codes are sent when the key is released. If
the key is held down, the make codes are repeated at the typematic rate.