Rockwell Automation 6180 Industrial Computers - Manual (Page 137)

Keypad Configuration Utility Software 13–15
Publication 6180-6.0
Figure 13- 8
INSERT SCREEN CAPTURE HERE
•
Function Keys K1 - K8 and K9 - K16
You can set the configuration for all programmable keys or a selected
group of keys.
To set the default configuration to Function keys:
1. Choose Select All Programmable Keys from the Edit menu
2. Choose Set Default Configuration
_
Function Keys from the Edit
menu.
The definitions of the programmable keys are updated:
•
F1 - F10 are defined as <F1> – <F10>
•
F11 - F20 are defined as <Left Shift+F1> – <Left Shift+F10>
•
K1 - K8 are defined as <Left Ctrl+F1> – <Left Ctrl+F8>
•
K9 - K16 are defined as <Left Ctrl+Left Shift+F1> – <LeftCtrl+Left
Shift+F8>
Note:
These are the factory default settings.
Please note that the key definitions change but the actual keys are not
relabeled.
To view the definition of a key:
•
select the key and choose Key Configuration from the Edit menu.
•
or click the right mouse button on the key and select Key
Configuration from the popup menu.
•
or select Print Preview from the File menu to view all keys.