Rockwell Automation 6180 Industrial Computers - Manual (Page 139)

Keypad Configuration Utility Software 13–17
Publication 6180-6.0
•
Function Keys (K1-K12)
•
Alpha Keys (uppercase A – Z)
Figure 13- 11
INSERT SCREEN CAPTURE HERE
You can set the configuration for all programmable keys or a selected
group of keys.
To set the default configuration to Function keys:
1. Choose Select All Programmable Keys from the Edit menu
2. Choose Set Default Configuration
_
Function Keys from the Edit
menu.
The definitions of the programmable keys are updated:
•
K1-K12 are defined as F1-F12
•
A–L are defined as F1–F12
•
M is disabled
•
N–Y are defined as <Left Shift+F1> - <Left Shift+F12>
•
Z is disabled
To set the default configuration to Alpha keys:
1. Choose Select All Programmable Keys from the Edit menu.
2. Choose Set Default Configuration
_
Alpha (A–Z) Keys from the Edit
menu.
The definitions of the programmable keys are updated:
•
A-Z are defined as a–z
•
K1–K12 are defined F1–F12
Note:
These are the factory default settings.
To view the definition of a key:
•
select the key and choose Key Configuration from the Edit menu.
•
or click the right mouse button on the key and select Key
Configuration from the popup menu.
•
or select Print Preview from the File menu to view all keys. You
must define a default printer before using Print Preview.