Rockwell Automation 6180 Industrial Computers - Manual (Page 69)

Adding and Removing System Adding and Removing System Adding and Removing System Adding and Removing System
Components
Components Components Components
This chapter describes how to remove and install:
•
back panel and accessory drive cover
•
add–in boards
•
processor board
The 6180 Computer contains line voltages. Make sure you disconnect
all power to the 6180 Computer before performing any of the operations
described in this chapter.
ATTENTION: Disconnect all power from the 6180
Computer before removing components. Failure to
disconnect power could result in severe electrical shock
or damage to the 6180 Computer.
ATTENTION: Wear an ESD wrist strap (well grounded)
and perform work in a static safe environment.
Electrostatic discharge can damage the 6180 Computer
and components.
Chapter Chapter Chapter Chapter
4
Chapter Objective
Safety Precautions