Rockwell Automation 6180 Industrial Computers - Manual (Page 135)

Keypad Configuration Utility Software 13–13
Publication 6180-6.0
To disable one or more keys:
1. Select the key(s) you want to disable.
2. Choose Enable Key from the Edit Menu or click the right mouse
button on the key and choose Enable Key from the popup menu.
A red X appears on the key, indicating that it is disabled and the check
mark is removed from Enable Key on the Edit menu.
To enable a key:
1. Select the disabled key.
2. Choose Enable Key from the Edit Menu or click the right mouse
button on the key and choose Enable Key from the popup menu.
The red X is cleared from the key, and a check mark appears next to
Enable Key on the Edit menu.
If multiple keys are selected with some keys enabled and others disabled,
choosing the Enable Key command will enable all the selected keys.
Setting Configuration of Programmable Keys
(64-Key Standard Keypad)
On a 64-key standard keypad, you can set the default configuration of
the programmable keys to Function Keys or Alpha Keys.
•
Function Keys
F1 - F12, S1 - S12 (shifted function keys)
Figure 13- 6
INSERT SCREEN CAPTURE HERE
Figure 13- 7
•
Alpha Keys (lower case a-z)
INSERT SCREEN CAPTURE HERE
You can set the configuration for all programmable keys or a selected
group of keys.
To set the default configuration to Function keys:
1. Choose Select All Programmable Keys from the Edit menu