Rockwell Automation 6180 Industrial Computers - Manual (Page 170)

16–4 Maintenance
Publication 6180-6.0
Clean the power supply fan filter at least once a month under normal
conditions. You may need to clean the filter more frequently if the 6180
Computer is located in an area with high dust levels.
ATTENTION: Disconnect all power from the 6180
Computer before removing components. Failure to
disconnect power could result in severe electrical shock
or damage to the 6180 Computer.
To clean the power supply fan filter:
Note:
The Pentium II product does not have a power supply fan
filter.
Note:
A replacement filter kit is available (Catalog No. 6189–
FANFIL). This kit contains a chassis fan filter (includes
retainer) and a power supply filter.
1. Disconnect all power from the 6180 Computer.
2. Remove the back panel and accessory drive panel. See page 4-2.
3. Remove the power supply filter..
Figure 16- 2
Cleaning the Power
Supply Fan Filter