Fluke Biomedical VT Plus HF - Manual (Page 113)

Remote Operation
Plots
4
4-29
fec112.bmp
Type the desired the range and click OK .
• Right-click the plot to re-scale. Select Manual Scale ; the above dialog box appears.
Type the preferred range and click OK .
Signal Selection
Three plots on the Monitor screen and the plot on the single plot screen can be set up to
display any of the signals flow, volume, airway pressure, low pressure, high pressure, or
oxygen.
To change the displayed signal on a plot:
1. Select the plot name from the Plots menu.
2. Select the name of the signal to be displayed.
fec113.bmp
The desired signal name should appear on the title of the plot and above the statistics
to the right of the plot. The statistics and the plot now reflect the new signal and are
displayed in the selected units for that signal.
To change the units for a signal:
Select
Signal Units from the Setup menu. All statistics and plots reflect the current
units for the assigned signal.