Fluke Biomedical VT Plus HF - Manual (Page 63)

Operation
Pressure Screens
3
3-13
Pressure Screens
There are two types of pressure screen, high-pressure and low-pressure, based on which
Analyzer pressure port is used.
High-Pressure Screen
The High-Pressure screen displays the signal and statistics for the pressure signal from
the high-pressure ports of the Analyzer.
fec051.bmp
Range Press the RANGE soft key to change between low pressure, airway
pressure, and high-pressure screens.
Units Press the UNITS soft key to change the units of measure for the high-
pressure screen. Possible units of measure for this screen include:
mbar millibar = .001 Bar
bar 14.7 PSIG (Barometric)
mmHg millimeters of mercury
inHg inches of mercury
cmH
2
O centimeters of water
inH
2
O inches of water
PSIG pounds per square inch
atm atmospheres
kPa kilopascals
Re-scale Press the RESCALE soft key to change the scale on the plot of data to a
more appropriate window of values.
Note
RESCALE uses the current min/max values to
determine plot limits.
Clear Press the CLEAR soft key to reset the statistics and re-start the plot.
The user can select the breath parameters displayed on this screen by following the
instructions under Selecting Breath Parameters.