Fluke Biomedical VT Plus HF - Manual (Page 93)

Remote Operation
Main Screens and Tests
4
4-9
Main Screens and Tests
VT for Windows has seven main screens that are accessed through the Screen tabs; these
are listed below:
• Monitor screen
• Single Plot screen
• Loop Plots screen
• Full Test screen
• Trend Test screen
• Leak Test screen
• Stacked Volume Test screen
Monitor Screen
The Monitor screen, shown in Figure 4-4, allows observation of three of the signals at the
same time.
fec086.bmp
Figure 4-4. Monitor Screen
Each plot can be configured to display any of the signals, (flow, volume, airway pressure,
low pressure, high pressure, and oxygen). Each plot can be independently, set to auto-
scale or manually re-scaled to the user's desired range of values.
On the right hand side of the screen, the statistics for the selected signals are displayed.
These statistics show the min, max, average and current value for the signal that is
currently displayed. For more information on configuring plots, refer to Signal Selection,
Automatic Rescaling, and Manual Re-scaling.