Fluke Biomedical VT Plus HF - Manual (Page 21)

Introduction and Specifications
Instrument Familiarity
1
1-9
Table 1-6. Functions (cont.)
Icon Name Function
G Print This key prints the current data to the printer. The mode and
format of the printout is set using the printer options function
selected under the setup menu.
H Help This key displays help for any screen. A brief description of the
screen and of the options available from that screen is provided
when help is pressed.
D Soft Keys These are four programmable keys located directly below the
display. Each display mode has unique options assigned to its
soft keys.
: FLOW/0 Key This key selects the flow mode on the Analyzer. The flow mode
displays signal, instantaneous numeric value and statistical data
for the high or low flow signal. This key is also the 0 key for
numeric data entry.
; PRESSURE/1 Key This key selects the pressure mode. The pressure mode
displays the signal, instantaneous numeric value, and statistical
data for the high, low, or airway pressure signal. This key is also
the 1 key for numeric data entry.
< VOLUME/2 Key This key selects the volume mode. The volume mode displays
the signal, instantaneous numeric value, and statistical data for
the volume signal. This key is also the 2 key for numeric data
entry.
= O2/3 Key This key selects the oxygen mode. The oxygen mode displays
the signal, instantaneous numeric value and statistical data for
the oxygen signal. This key is also the 3 key for numeric data
entry.
> MORE/4 Key This key selects other tests such as the Leak test and the Trend
test. This key is also the 4 key for numeric data entry.
? FULL/5 Key This key selects the full breath parameters mode. The full mode
displays all of the breath parameters calculated by the Analyzer
following every breath. Note that one of the breath-detect
settings must be enabled to observe volume signals or data.
Refer to System Setup for breath detection settings. This key is
also the 5 key for numeric data entry.
@ MONITOR/6 Key This key selects the monitor mode. The monitor mode displays
the signal and instantaneous value for three of the signals
measured by the Analyzer. Alternatively, the lower of the three
plots may be replaced by selected breath parameters. The user
can select the signals and/or parameters that are displayed. This
key is also the 6 key for numeric data entry.