Fluke Biomedical VT Plus HF - Manual (Page 62)

VT Plus HF
Operators Manual
3-12
Low-Flow Screen
The Low-Flow screen displays the signal and statistics for the flow in the low-flow port
of the Analyzer.
fec050.bmp
Range Press the RANGE soft key to change from a high-flow screen to a low-
flow screen or back again.
Units Press the UNITS soft key to change the units of measure for the low-
flow screen. Possible units of measure for this screen include:
LPM Liters per minute
CFM Cubic feet per minute
LPS Liters per second
ml/min Milliliters per minute
ml/sec Milliliters per second
Re-scale Press the RESCALE soft key to change the scale on the plot of data to a
more appropriate window of values.
Note
RESCALE uses the current min/max values to
determine plot limits.
Clear Press the CLEAR soft key to reset the statistics and re-start the plot.
The user can select the breath parameters displayed on this screen by following the
instructions under Selecting Breath Parameters.