Fluke Biomedical VT Plus HF User Manual
Page 97
Advertising
![background image](/files/785361/content/doc097.png)
Remote Operation
Main Screens and Tests
4
4-13
Setting Trend Test Parameters
The Trend test setup screen, shown in Figure 4-8, allows the user to choose the parameter
to run the test on and to choose the percent limit for the test.
fec090.bmp
Figure 4-8. Trend Test: Setup Screen
Initially, the start button is not enabled. A trend test may be started only after receiving a
valid value for the breath parameter chosen.
Advertising