Verilink WANsuite 5130 (34-00298.L) Product Manual - Manual (Page 125)

W e b S e r v e r I n t e r f a c e 3-93
Figure 3.91 Upload/Save Screen
Password
The Password screen (Figure 3.92) is used to modify the password that
restricts access to the Web Server interface.
Acceptable characters for use in a password are digits 0–9 and letters A–Z
and a–z, for a total of 62 distinct characters.
Figure 3.92 Password Screen
To change either the Admin or Read-Only password, you must enter it once
in the New Password field and then re-enter the same password in the
Confirm Password field. After entering the new password in both these fields,
click the “Change Admin Password” or the “Change Read Only Password”
button to update and establish the new password.
NOTICE: Remember that passwords are case-sensitive and are limited to no more
than 10 characters. When logging on, password must be entered exactly
as it was programmed.