Verilink WANsuite 5130 (34-00298.L) Product Manual - Manual (Page 153)

V T 1 0 0 I n t e r f a c e 4-25
statistics. This table also gives the status of the alarms (OK, Alarmed) related
to DS0s.
The user-activated prompts listed below are at the bottom of the DS0 Monitor
Details screen.
Figure 4.22 Channel Table Details Screen
The Channel Table Details screen lets you establish the Rate, Service, and
Idle Pattern parameters for any available channel. The screen parameters are
described below.
Rate The unit can operate at any data rate that is a multiple of 56 or 64 kbps.
Values: 56K, 64K
Default: 64K
Service Specifies the service to which this channel is allocated. Refer to the Service
Table to see how the current services are configured.
Idle Pattern Selects the DS0 idle pattern sent by the unit and lets the unit determine if the
DS0 idle pattern has been sent by the other end.
Values: 0
−
FF (Hex)
Default: 7F
Prompt Function
Clear Alarms Clears all utilization alarms.
Channels Displays the Channel Table details for the Network 1,
Network 2, or Network services (Figure 4.22)
DS0 24 Hour History Displays DS0 monitor history in 15-min buckets for the past
24 hours (Figure 4.23).
DS0 30 Day History Displays DS0 monitor history in 24-hr buckets for the past 30
days (Figure 4.24).