Verilink WANsuite 5130 (34-00298.L) Product Manual - Manual (Page 21)

A b o u t t h e W A N s u i t e 5 1 6 0 / 5 1 3 0 1-7
• E-mail notification of alarm status for immediate notification of potential
network problems
• Management Interfaces:
• WANsight
−
an innovative, embedded Web-based user interface for
remote configuration and real-time reporting via Web browser
(Verilink recommends Microsoft Internet Explorer 5.0 or higher) that
decreases installation and configuration time for service employees,
simplifies troubleshooting and fault isolation of network problems, and
optimizes management of both TDM and frame-based services
• VT100 or TELNET
• Local Supervisory port
• Ethernet port for management or IP routing
• LCD
• Frame Relay Aware:
• Supports leased-line and frame relay services
• Layer 2 end-to-end visibility and control
• Embedded frame relay test set
• Layer 3 support for visibility beyond the Network layer (up to 25
protocols)
• “Top Talker” reports
−
lets you find out who’s generating the most IP
traffic on your LAN
Front Panel
The front panel of the WANsuite 5160 (Figure 1.1) provides three
user-activated input control buttons, four LED status indicators, and a 2-line,
16-character LCD that provides access to unit configuration, diagnostics, and
utilities.
Figure 1.1 Front Panel of WANsuite 5160