Verilink WANsuite 5130 (34-00298.L) Product Manual - Manual (Page 241)

F r o n t P a n e l L C D I n t e r f a c e 5-23
unit to the Main Menu screen. An incorrectly entered password returns you to
an “Idle” screen. If unsuccessful, reenter the password.
To disable the password function, select the Set Password option and then,
without pressing the
SCROLL button, press the SELECT button until the
cursor passes through all eight character spaces. The menu will then prompt
you to “Verify” the password. Reenter the password exactly as before and
again press
SELECT .
LCD E/D
Lets the user enable or disable the LCD interface buttons of the unit.
NOTICE: If you set this parameter to “Disable,” you will immediately lock
yourself out of the LCD interface.
Log Out Menu
If the unit is not programmed with a password, you can end the session with
the computer and leave the menu system by pressing
EXIT while in the Main
Menu. If a password has been programmed, the unit prevents an inadvertent
log out by requiring you to press
SELECT in the Log Out menu.