Verilink WANsuite 5130 (34-00298.L) Product Manual - Manual (Page 256)

B-4 W A N s u i t e 5 1 6 0 / 5 1 3 0
Standard Traps
Trap No. Description VarBinds
dsx1LineStatusChange ds1Traps 0 1 A dsx1LineStatusChange trap is sent
when the value of an instance
dsx1LineStatus changes. It can be
utilized by an NMS to trigger polls.
When the line status change results
from a higher level line status
change (i.e. ds3), then no traps for
the ds1 are sent. dsx1LineStatus,
dsx1LineStatusLastChange
frDLCIStatusChange frEnterprise 1 This trap indicates that the indicated
Virtual Circuit has changed state. It
has either been created or
invalidated, or has toggled between
the active and inactive states. If,
however, the reason for the state
change is due to the DLCMI going
down, per-DLCI traps should not be
generated IfrCircuitIfIndex,
FrCircuitDlci,
FrCircuitState