Verilink WANsuite 5130 (34-00298.L) Product Manual - Manual (Page 167)

V T 1 0 0 I n t e r f a c e 4-39
SCADA Loopback Determines if and where SCADA will loopback received data.
Values: None, Loopback to Network, Loopback to Port
Default: None
The table below these parameters displays the SCADA statistics. You can
clear all SCADA statistics by selecting the “SCADA Clear Statistics” prompt
at the bottom of the screen.
Select the “SCADA Device List” prompt to bring up a screen that shows the
mapping between SCADA devices and endpoints (Figure 4.33).
Figure 4.33 SCADA Device List
Press “Enter” after selecting the device number to display the SCADA Device
Details (Figure 4.34) menu that lets you map SCADA devices to endpoints.
Figure 4.34 SCADA Device Details