Verilink WANsuite 5130 (34-00298.L) Product Manual - Manual (Page 134)

4-6 W A N s u i t e 5 1 6 0 / 5 1 3 0
Packet 4 Configuration). After you select an option, the unit will display a
confirmation screen (Figure 4.5) where you may choose either to proceed with
the maintenance reset or not.
Figure 4.5 Confirmation Screen
NOTICE: Performing a “Maintenance Reset” or a “Save and Restart” will
terminate communications with the unit. Refresh (by pressing
“Ctrl+U”) after approximately 10 seconds to restore communications.
Save and Restart
Selecting “Save and Restart” will display a confirmation menu similar to that
shown in Figure 4.5. Select “yes” to save current configuration settings.
Interfaces Screen
The WANsuite 5160 Interfaces screen in Figure 4.6 and the WANsuite 5130
Interfaces screen in Figure 4.7 display lists of all the units’ available
interfaces.