Verilink WANsuite 5130 (34-00298.L) Product Manual - Manual (Page 135)

V T 1 0 0 I n t e r f a c e 4-7
Figure 4.6 WANsuite 5160 Interfaces Screen
Figure 4.7 WANsuite 5130 Interfaces Screen
From the 5160 Interfaces screen, you may choose from the following:
Network 1, Network 2, Serial 1, Serial 2, 10/100 Ethernet, or Supervisory.
From the 5130 Interfaces screen, you may choose from Network, Serial, 10/
100 Ethernet, or Supervisory.
Network Screens
The Network 1 and Network 2 screens on the 5160 and the Network screen
on the 5130 offer the same parameters except for the “Function” parameter,
which is found only on the Network 2 Config screen (Figure 4.8). All
Network ports operate in the long-haul or short-haul mode. The Network
Config screens let you view and make changes to the Network interface's
configuration as described below. In addition, these screens provide a table
that displays the alarm values for the Network interface.