Verilink WANsuite 5130 (34-00298.L) Product Manual User Manual

Page 142

Advertising
background image

4-14

W A N s u i t e 5 1 6 0 / 5 1 3 0

(like a DSU/CSU), this parameter must be set to “DTE” (valid only for Packet
mode, not TDM).

Values: DCE, DTE
Default: DCE

NOTICE:

DTE mode requires the use of an optional DTE cable. Refer to
Appendix A, “Specifications,”
for ordering information.

Packet Rate

If the port is running in Packet mode, the Rate must be configured to the
desired port speed (in bits per second). In TDM mode, the port speed rate will
be set by configuring the next four parameters (Start Channel, Number of
Channels, Bundling, and Channel Rate).

Values: Nx56K or Nx64K where N = 1-32
Default: 1536 kbps

Bundling

Selects whether the DTE channel assignment is made as a “Contiguous”
group or as “Alternate” channels. Selecting “Alternate” ensures ones density.
Because the unit allows individual channels to be configured for a service, a
value of “Arbitrary” will be returned for this parameter if the current channel
allocation is not contiguous or Alternate. The “Arbitrary” value can only be
supplied by the unit

it cannot be set by the user.

Values: Contiguous, Alternate, Arbitrary
Default: Contiguous

NOTICE:

Because “Alternate” Bundling assigns every other channel, only half
the channels are available.

Start Channel

Selects the starting channel in the 24-channel DS1 bit stream. Starting with
the specified channel, the unit automatically assigns the channels that follow.

Values: 1 through 24
Default: 1

# of Channels

Specifies the number of channels to be assigned to the DTE.

Values: 0 through 24
Default: 24 Channel Rate

Channel Rate

The unit can operate at any data rate that is a multiple of 56 or 64 kbps. If

Ν

x64K” is selected, the ones density requirements of the T1 network line

must be ensured. If “

Ν

x56K” is selected, ones density for the selected DS0

channel is maintained.

Values: Nx56K, Nx64K
Default: Nx64K

NOTICE:

Start Channel, Number of Channels, and Channel Rate cannot be
changed if Bundling is not also changed from “Arbitrary.”

Advertising
This manual is related to the following products: