Verilink WANsuite 5130 (34-00298.L) Product Manual - Manual (Page 38)

3-6 W A N s u i t e 5 1 6 0 / 5 1 3 0
Figure 3.4 Network 1 Screen
Figure 3.5 Network 2 Screen (Top Portion Only)
Function (Network 2
Only)
In the “Slaved” function, Network 2 is slaved and can only be mapped to
Network 1. In the Network function, Network 2 functions as an independent
network, but can only be mapped to Serial 2.
Values: Slaved, Network
Default: Slaved
NOTICE: The “Function” parameter fundamentally affects the operation of the
unit. Even though this parameter is found only on the Network 2 screen,
its setting affects both Network ports and the Service table.
Mode Selects the network service type.
Values: Long Haul, Short Haul
Default: Long Haul