Verilink WANsuite 5130 (34-00298.L) Product Manual - Manual (Page 161)

V T 1 0 0 I n t e r f a c e 4-33
Throughput (bits/sec)
Peak Peak bandwidth (in bps) as measured over a 10-second period.
Average Average bandwidth (in bps) used by the port.
Period Index Selects the interval (Current, Summary, or 1-96) to be viewed on the Frame
Relay Port Statistics screen.
PPP Service Details Screen
The PPP Service Details screen (Figure 4.28) gives you access to
configuration parameters that can be viewed/changed as described in the
following paragraphs. To save new parameters, press the “Esc” key.
Figure 4.28 PPP Service Details Screen
ACCM The Asynchronous Control Character Map (ACCM) configuration option
provides a method to negotiate the use of control character transparency on
asynchronous links.
Values: 0–FFFFFFFF (Hex)
Default: FFFFFFFF
MRU The Maximum Receive Units (MRU) configuration option may be set to
inform the peer that the implementation can receive larger packets, or to
request that the peer send smaller packets.
Values: 128–4096
Default: 1500
Port IP Address The IP Address of the port. For unnumbered PPP link, set to 0.0.0.0 and set
IP Address Negotiation to “No.”
Default: 192.168.1.2
Peer IP Address Enter the IP address of the peer that will negotiate authentication protocols.
Default: 192.168.1.3