Verilink WANsuite 5130 (34-00298.L) Product Manual - Manual (Page 3)

iii
3 The unit has been designed to prevent harm to the network. If the telephone company finds
that the equipment is exceeding tolerable parameters, it can temporarily disconnect service.
In this case, the telephone company will give you advance notice, if possible.
4 No customer is authorized to repair this equipment, regardless of warranty status.
5 If the telephone company alters its equipment in a manner that will affect the use of this
device, it must give you warning so that you have the opportunity for uninterrupted service.
You will be advised of your right to file a complaint with the FCC.
6 If the equipment malfunctions, all repairs should be performed by our company or an
authorized agent. It is the responsibility of users requiring service to report the need for
service to our company or to one of our authorized agents.
Canadian Emissions
Requirements This digital apparatus does not exceed the Class A limits for radio noise emissions from digital
apparatus set out in the Radio Interference Regulations of the Canadian Department of Commu-
nications.
Le présent appareil numérique n’émet pas de bruits radioélectriques dépassant les limites appli-
cables aux appareils numériques (de la class A) prescrites dans le Règlement sur le brouillage
radioélectrique edicté par le ministère des Communications du Canada.
Safety Precautions When handling this equipment, follow these basic safety precautions to reduce the risk of elec-
tric shock and injury:
• Follow all warnings and instructions marked on the product and in the manual.
• Unplug the hardware from the wall outlet before cleaning. Do not use liquid cleaners or aerosol clean-
ers. Use a slightly damp cloth for cleaning.
• Do not place this product on an unstable cart, stand, or table. It may fall, causing serious damage to
the product.
• Slots in the unit are provided for ventilation to protect it from overheating. These openings must not
be blocked or covered. Never place this product near a radiator or heat register.
• This product should be operated only from the type of power source indicated on the marking label
and manual. If you are unsure of the type of power supply you are using, consult your dealer or local
power company.
• Do not allow anything to rest on the power cord. Do not locate this product where the cord interferes
with the free movement of people.
• Do not overload wall outlets and extension cords, as this can result in fire or electric shock.
• Never push objects of any kind into the unit. They may touch dangerous voltage points or short out
parts that could result in fire or electric shock. Never spill liquid of any kind on this equipment.
• Unplug the equipment from the wall outlet and refer servicing to qualified service personnel under the
following conditions:
• When the power supply cord or plug is damaged or frayed.
• If liquid has been spilled into the product.
• If the product has been exposed to rain or water.
• If the product has been dropped or if the housing has been damaged.