Document Outline

• Guaranty and Declaration
• Safety Requirement
  • General Safety Summary
  • Safety Terms and Symbols
  • Allgemeine Sicherheits Informationen
  • Sicherheits Begriffe und Symbole
  • Measurement Category
  • Ventilation Requirement
  • Working Environment
  • General Care and Cleaning
  • Environmental Considerations
• MSO1000Z/DS1000Z Series Overview
• Document Overview
• Quick Start
  • General Inspection
  • Appearance and Dimensions
  • To Prepare the Oscilloscope for Use
    • To Adjust the Supporting Legs
    • To Connect to Power Supply
    • Power-on Inspection
    • To Connect the Probe
    • Function Inspection
    • Probe Compensation
  • Front Panel Overview
  • Rear Panel Overview
  • Front Panel Function Overview
    • VERTICAL
    • Logic Analyzer
    • Signal Source
    • HORIZONTAL
    • TRIGGER
    • CLEAR
    • AUTO
    • RUN/STOP
    • SINGLE
    • Multifunction Knob
    • Function Menus
    • Print
  • User Interface
  • Parameter Setting Method
  • To Use the Security Lock
  • To Use the Built-in Help System
• To Set the Vertical System
  • To Enable the Analog Channel
  • Channel Coupling
  • Bandwidth Limit
  • Probe Ratio
  • Waveform Invert
  • Vertical Scale
  • Amplitude Unit
  • Channel Label
  • Delay Calibration of the Analog Channel
• To Set the Horizontal System
  • Delayed Sweep
  • Time Base Mode
    • YT Mode
    • XY Mode
    • Roll Mode
• To Set the Sample System
  • Acquisition Mode
    • Normal
    • Peak Detect
    • Average
    • High Resolution
  • Sin(x)/x
  • Sample Rate
  • Memory Depth
  • Antialiasing
• To Trigger the Oscilloscope
  • Trigger Source
  • Trigger Mode
  • Trigger Coupling
  • Trigger Holdoff
  • Noise Rejection
  • Trigger Type
    • Edge Trigger
    • Pulse Trigger
    • Slope Trigger
    • Video Trigger
    • Pattern Trigger
    • Duration Trigger
    • TimeOut Trigger (Option)
    • Runt Trigger (Option)
    • Window Trigger (Option)
    • Delay Trigger (Option)
    • Setup/Hold Trigger (Option)
    • Nth Edge Trigger (Option)
    • RS232 Trigger (Option)
    • I2C Trigger (Option)
    • SPI Trigger (Option)
  • Trigger Output Connector
• MATH and Measurement
  • Math Operation
    • Addition
    • Subtraction
    • Multiplication
    • Division
    • FFT
    • "AND" Operation
    • "OR" Operation
    • "XOR" Operation
    • "NOT" Operation
    • Intg
    • Diff
    • Sqrt
    • Lg (Use 10 as the Base)
    • Ln
    • Exp
    • Abs
    • Fx Operation
    • Math Operation Label
  • Auto Measurement
    • Quick Measurement after AUTO
    • One-key Measurement of 33 Parameters
    • Frequency Counter Measurement
    • Measurement Setting
    • To Clear the Measurement
    • All Measurement
    • Statistic Function
    • Measurement History
    • Measurement Result Display Type
  • Cursor Measurement
    • Manual Mode
    • Track Mode
    • Auto Mode
    • XY Mode
• Digital Channel
  • To Select the Digital Channel
  • To Turn on/off the Digital Channel
  • Group Set
  • To Set the Waveform Display Size
  • Reorder Setting
  • Auto View
  • To Set the Threshold
  • To Set the Label
  • Probe Calibration
  • Digital Channel Delay Calibration
• Protocol Decoding
  • Parallel Decoding
  • RS232 Decoding (Option)
  • I2C Decoding (Option)
  • SPI Decoding (Option)
• Reference Waveform
  • To Enable REF Function
  • To Select REF Source
  • To Adjust REF Waveform Display
  • To Save to Internal Memory
  • To Set the Color
  • To Reset the Reference Waveform
  • To Export to Internal or External Memory
  • To Import from Internal or External Memory
• Pass/Fail Test
  • To Enable Pass/Fail Test
  • To Select Source
  • Mask Range
  • Test and Output
  • To Save the Test Mask
  • To Load the Test Mask
• Waveform Record
  • Common Settings
  • Playback Option
  • Record Option
• Display Control
  • To Select the Display Type
  • To Set the Persistence Time
  • To Set the Waveform Intensity
  • To Set the Screen Grid
  • To Set the Grid Brightness
• Signal Source
  • To Output Basic Waveform
    • To Output Sine
    • To Output Square
    • To Output Ramp
    • To Output Pulse
    • To Output DC
    • To Output Noise
  • To Output Built-in Waveform
  • To Output Arbitrary Waveform
    • To Select Waveform
    • To Create Waveform
    • To Edit Waveform
  • Modulation
    • AM
    • FM
• Store and Recall
  • Storage System
  • Storage Type
  • Internal Storage and Recall
  • External Storage and Recall
  • Disk Management
    • To Select File Type
    • To Create a New File or Folder
    • To Delete a File or Folder
    • To Rename a File or Folder
    • To Clear the Local Memory
  • Factory
• Accessibility Setting
  • Remote Interface Configuration
    • LAN Configuration
    • USB Device
    • GPIB Address
  • System-related
    • Sound
    • Language
    • System Information
    • Vertical Reference
    • Power-off Recall
    • Self-calibration
    • Print Setting
    • Aux Output
    • Option Management
    • Auto Options
    • Key Lock
• Remote Control
  • Remote Control via USB
  • Remote Control via LAN
  • Remote Control via GPIB
• Troubleshooting
• Specifications
• Appendix
  • Appendix A: Accessories and Options
  • Appendix B: Warranty
• Index