PLANET WGSW-48040HP - Manual (Page 152)

Command Guide of WGSW-48040HP
ip igmp snooping unsolicited-report-interval <IpmcUri : 0-31744>
ip Interface Internet Protocol config commands
igmp Internet Group Management Protocol
snooping Snooping IGMP
robustness-variable Robustness Variable
<IpmcUri : 0-31744> 0 - 31744 seconds
Default:
1
Usage Guide:
To configure Unsolicited-Report-Interval of IGMP snooping for specific VLAN
Example:
To configure Unsolicited-Report-Interval (99 seconds) of IGMP snooping for VLAN X
Switch# configure terminal
Switch (config)# interface vlan X
Switch (config-if-vlan)# ip igmp snooping unsolicited-report-interval 99
4.2.46.18 ipv6 address
Command:
Ipv6 address X:X:X:X::X/<0-128>
ipv6 IPv6 configuration commands
address Configure the IPv6 address of an interface
X:X:X:X::X/<0-128> IPv6 prefix x:x::y/z
Default:
None
Usage Guide:
To configure IPv6 address for specific VLAN
Example:
To configure IPv6 address (2001::7788/64) for VLAN X
Switch# configure terminal
Switch (config)# interface vlan X
Switch (config-if-vlan)# ipv6 address 2001::7788/64
-152-