PLANET WGSW-48040HP - Manual (Page 221)

Command Guide of WGSW-48040HP
Usage Guide:
To configure profile name of MVR VLAN
Example:
To configure profile name (6) of MVR VLAN (5)
Switch# configure terminal
Switch (config)# mvr vlan 5 name 6
4.2.120 no
Command:
no
no Negate a command or set its defaults
Default:
N/A
Usage Guide:
To default the function
Example:
To disable the function (loop-protect)
Switch# configure terminal
Switch (config)# no loop-protect
4.2.121 ntp
Command:
ntp
ntp Configure NTP
Default:
Disabled
Usage Guide:
To enable the NTP service
-221-