PLANET WGSW-48040HP - Manual (Page 263)

Command Guide of WGSW-48040HP
4.2.163.5 spanning-tree auto-edge
Command:
spanning-tree auto-edge
spanning-tree Spanning Tree protocol
auto-edge Auto detect edge status
Default:
Enabled
Usage Guide:
To enable the Auto Edge of CIST Aggregated Port
Example:
To enable the Auto Edge of CIST Aggregated Port
Switch# configure terminal
Switch (config)# snmp-server host planet
Switch (config-snmps-host)# spanning-tree auto-edge
4.2.163.6 spanning-tree bpdu-guard
Command:
spanning-tree bpdu-guard
spanning-tree Spanning Tree protocol
bpdu-guard Enable/disable BPDU guard
Default:
Disabled
Usage Guide:
To enable the BPDU Guard of CIST Aggregated Port
Example:
To enable the BPDU Guard of CIST Aggregated Port
Switch# configure terminal
Switch (config)# snmp-server host planet
Switch (config-snmps-host)# spanning-tree bpdu-guard
-263-