PLANET WGSW-48040HP - Manual (Page 260)

Command Guide of WGSW-48040HP
engineID Configure trap server's engine ID
probe Probe trap server's engine ID
Default:
Disabled
Usage Guide:
To configure Version of SNMP
Example:
To configure Version (below table) of SNMP
Switch# configure terminal
Switch (config)# snmp-server host planet
Switch (config-snmps-host)# version v2 planet
4.2.163 spanning-tree aggregation
Command:
spanning-tree aggregation
spanning-tree Spanning Tree protocol
aggregation Aggregation mode
Default:
None
Usage Guide:
To enter aggregation mode of STP
Example:
To enter aggregation mode of STP
Switch# configure terminal
Switch (config)# spanning-tree aggregation
Switch (config-stp-aggr)#
4.2.163.1 do
-260-