PLANET WGSW-48040HP - Manual (Page 381)

Command Guide of WGSW-48040HP
To display the Protocol-based VLAN information.
Example:
To display the Protocol-based VLAN information.
Switch # show vlan protocol
Protocol Type Protocol (Value) Group ID
------------- ------------------------ --------
LLC_SNAP OUI-00:e0:2b; PID:0x1 q
Switch 1
---------
Group ID VID Ports
---------------- ---- -----
q 2 GigabitEthernet 1/1
4.20.110 show voice vlan
Command:
show voice vlan [ oui <oui> | interface ( <port_type> [ <port_list> ] ) ]
show Show running system information
voice Voice appliance attributes
vlan Vlan for voice traffic
interface Select an interface to configure
oui OUI configuration
<oui> OUI value
Default:
N/A
Usage Guide:
To display the Voice VLAN information.
Example:
To display the Voice VLAN information for GigabitEthernet 1/1
Switch # show voice vlan interface GigabitEthernet 1/1
GigabitEthernet 1/1 :
---------------------
-381-