PLANET WGSW-48040HP - Manual (Page 321)

Command Guide of WGSW-48040HP
interface Select an interface to configure
Default:
N/A
Usage Guide:
To display the DHCP Snooping configuration.
Example:
To display the DHCP Snooping configuration for GigabitEthernet 1/1.
Switch # show ip dhcp snooping interface GigabitEthernet 1/1
GigabitEthernet 1/1 untrusted
4.20.36 show ip dhcp snooping table
Command:
show ip dhcp snooping table
show Show running system information
ip Internet Protocol
dhcp Dynamic Host Configuration Protocol
snooping DHCP snooping
table show ip dhcp snooping table
Default:
N/A
Usage Guide:
To display the DHCP Snooping table.
Example:
To display the DHCP Snooping table.
Switch # show ip dhcp snooping table
4.20.37 show ip http server secure status
Command:
show ip http server secure status
show Show running system information
-321-