PLANET WGSW-48040HP - Manual (Page 354)

Command Guide of WGSW-48040HP
Default:
N/A
Usage Guide:
To display the external clock output configuration.
Example:
To display the external clock output configuration.
Switch # show ptp ext
PTP External One PPS mode: Output, Clock output enabled: True, frequency : 1, VCXO
enable: True
4.20.81 show pvlan
Command:
show pvlan [ <pvlan_list> ]
show Show running system information
pvlan PVLAN configuration
Default:
N/A
Usage Guide:
To display the Private VLAN membership configuration.
Example:
To display the Private VLAN membership configuration for all VLANs.
Switch # show pvlan
PVLAN ID Ports
-------- -----------------------------------------------------------------------------
1 GigabitEthernet 1/1, GigabitEthernet 1/2, GigabitEthernet 1/3,
4.20.82 show pvlan isolation
Command:
show pvlan isolation [ interface ( <port_type> [ <port_list> ] ) ]
show Show running system information
-354-