PLANET WGSW-48040HP - Manual (Page 182)

Command Guide of WGSW-48040HP
Switch# configure terminal
Switch (config)# ip routing
4.2.69 ip source binding interface
Command:
ip source binding interface 10GigabitEthernet | GigabitEthernet <port_type_id>
<ipv4_ucast> <ipv4_netmask>
ip Internet Protocol
source source command
binding ip source binding
interface ip source binding entry interface config
<ipv4_ucast> Select an IP Address to configure
<ipv4_netmask> Select a subnet mask to configure
Default:
None
Usage Guide:
To enable Static IP Source Guard Table for specific interface
Example:
To enable Static IP Source Guard Table as below table for GigabitEthernet 1/1
Switch# configure terminal
Switch (config)# ip source binding interface GigabitEthernet 1/1 1 192.168.0.77
255.255.255.255
4.2.70 ip ssh
Command:
ip ssh
ip Internet Protocol
ssh Secure Shell
-182-