PLANET WGSW-48040HP - Manual (Page 207)

Command Guide of WGSW-48040HP
Switch# configure terminal
Switch (config)# lldp timer 555
4.2.94 lldp transmission-delay
Command:
lldp transmission-delay <1-8192>
lldp LLDP configurations.
transmission-delay Sets LLDP transmision-delay. LLDP transmission delay (the amount of time that the
transmission of LLDP frames will delayed after LLDP configuration has changed) in seconds.)
<1-8192> 1-8192 seconds.
Default:
2
Usage Guide:
To configure Tx transmission-delay time of LLDP
Example:
To configure Tx transmission-delay time (88) of LLDP
Switch# configure terminal
Switch (config)# lldp transmission-delay 88
4.2.95 logging host
Command:
logging host <hostname> | <ipv4_ucast>
logging Syslog
host host
<hostname> Domain name of the log server
<ipv4_ucast> IP address of the log server
Default:
0
Usage Guide:
To configure address of log server
-207-