PLANET WGSW-48040HP - Manual (Page 80)

Command Guide of WGSW-48040HP
4.2.45.21 flowcontrol
Command:
flowcontrol off | on
flowcontrol Traffic flow control.
off Disable flow control.
on Enable flow control.
Default:
Disable
Usage Guide:
To enable Flow-control for specific interface
Example:
To enable Flow-control for GigabitEthernet X/X
Switch# configure terminal
Switch (config)# interface GigabitEthernet X/X
Switch (config-if) # flowcontrol on
4.2.45.22 green-ethernet energy-detect
Command:
green-ethernet energy-detect
green-ethernet Green ethernet (Power reduction)
energy-detect Enable power saving for ports with no link partner.
Default:
N/A
Usage Guide:
To enable power saving for ports with no link partner
Example:
To enable power saving for ports with no link for GigabitEthernet X/X
Switch# configure terminal
Switch (config)# interface GigabitEthernet X/X
Switch (config-if) # green-ethernet energy-detect
-80-