PLANET WGSW-48040HP - Manual (Page 183)

Command Guide of WGSW-48040HP
Default:
None
Usage Guide:
To enable SSH service
Example:
To enable SSH service
Switch# configure terminal
Switch (config)# ip ssh
4.2.71 ip verify source
Command:
ip verify source
ip Internet Protocol
verify verify command
source verify source
Default:
Disabled
Usage Guide:
To enable IP Source Guard
Example:
To enable IP Source Guard
Switch# configure terminal
Switch (config)# ip verify source
4.2.72 ip verify source translate
Command:
ip verify source translate
ip Internet Protocol
verify verify command
source verify source
translate ip verify source translate all entries
-183-