PLANET WGSW-48040HP - Manual (Page 206)

Command Guide of WGSW-48040HP
Switch (config)# lldp med media-vlan-policy 1 guest-voice tagged 1 dscp 45 l2-priority
5
4.2.92 lldp reinit
Command:
lldp reinit <1-10>
lldp LLDP configurations.
reinit LLDP tx reinitialization delay in seconds
<1-10> 1-10 seconds.
Default:
2
Usage Guide:
To configure Tx re-initialization delay time of LLDP
Example:
To configure Tx re-initialization delay time (5) of LLDP
Switch# configure terminal
Switch (config)# lldp reinit 5
4.2.93 lldp timer
Command:
lldp timer <5-32768>
lldp LLDP configurations.
timer Sets LLDP TX interval (The time between each LLDP frame transmitted in seconds)
<5-32768> 5-32768 seconds.
Default:
30
Usage Guide:
To configure Tx interval time of LLDP
Example:
To configure Tx interval time (555) of LLDP
-206-