PLANET WGSW-48040HP - Manual (Page 257)

Command Guide of WGSW-48040HP
Usage Guide:
To configure Trap Host of SNMP
Example:
To configure Trap Host (below table) of SNMP
Switch# configure terminal
Switch (config)# snmp-server host planet
Switch (config-snmps-host)# host planet.com 66 informs
4.2.162.5 no
Command:
no
no Negate a command or set its defaults
Default:
N/A
Usage Guide:
To default the function
Example:
To disable the function (host planet.com 66 informs)
Switch# configure terminal
Switch (config)# snmp-server host planet
Switch (config-snmps-host)# no ip address dhcp
4.2.162.6 informs
Command:
informs retries <retries> timeout <timeout>
informs Send Inform messages to this host
retries retires inform messages
-257-