3 end, 4 exec-banner – PLANET WGSW-48040HP User Manual
Page 195
Advertising
Command Guide of WGSW-48040HP
Switch (config-line)# editing
4.2.83.3 end
Command:
end
end Go back to EXEC mode
Default:
None
Usage Guide:
To back to EXEC mode
Example:
To back to EXEC mode
Switch# configure terminal
Switch (config)# line vty 1
Switch (config-line)#end
Switch#
4.2.83.4 exec-banner
Command:
exec-banner
exec-banner Enable the display of the EXEC banner
Default:
Enabled
Usage Guide:
To enable the display of the EXEC banner
Example:
To enable the display of the EXEC banner
Switch# configure terminal
Switch (config)# line vty 1
-195-
Advertising