PLANET WGSW-48040HP - Manual (Page 353)

Command Guide of WGSW-48040HP
Example:
To display the slave lock configuration for PTP instance 0.
Switch # show ptp 0 slave-cfg
Stable Offset Offset Ok Offset Fail
------------- ------------- -----------
1000 1000 3000
4.20.79 show ptp <clockinst> slave-table-unicast
Command:
show ptp <clockinst> slave-table-unicast
show Show running system information
ptp Precision time Protocol (1588)
<Clockinst : 0-3> Show various PTP data
slave-table-unicast Show the Unicast slave table of the requested unicast masters
Default:
N/A
Usage Guide:
To display the unicast slave table.
Example:
To display the unicast slave table for PTP instance 0.
Switch # show ptp 0 slave-table-unicast
ip_addr mac_addr port Ann Sync
--------------- ----------------- ---- --- -----
4.20.80 show ptp ext
Command:
show ptp ext
show Show running system information
ptp Precision time Protocol (1588)
ext Show the 1PPS and External clock output configuration and vcxo frequency rate adjustment option
-353-