PLANET WGSW-48040HP - Manual (Page 355)

Command Guide of WGSW-48040HP
pvlan PVLAN configuration
isolation show isolation configuration
interface Search by port
Default:
N/A
Usage Guide:
To display the port isolation configuration.
Example:
To display the port isolation configuration.
Switch # show pvlan isolation
Port Isolation
-------------------------------- ---------
GigabitEthernet 1/1 Disabled
GigabitEthernet 1/2 Disabled
GigabitEthernet 1/3 Disabled
4.20.83 show qos
Command:
show qos [ { interface [ ( <port_type> [ <port> ] ) ] } | wred | { maps [ dscp-cos ]
[ dscp-ingress-translation ] [ dscp-classify ] [ cos-dscp ] [ dscp-egress-translation ] }
| { qce [ <qce> ] } ]
show Show running system information
qos Quality of Service
interface Interface
maps Global QoS Maps/Tables
cos-dscp Map for cos to dscp
dscp-classify Map for dscp classify enable
dscp-cos Map for dscp to cos
dscp-egress-translation Map for dscp egress translation
dscp-ingress-translation Map for dscp ingress translation
qce QoS Control Entry
<qce> QCE ID
wred Weighted Random Early Discard
Default:
N/A
-355-