PLANET WGSW-48040HP - Manual (Page 379)

Command Guide of WGSW-48040HP
Switch # show vlan
VLAN Name Interfaces
---- -------------------------------- ----------
1 default Gi 1/1-25 10G 1/1-4
4.20.107 show vlan ip-subnet
Command:
show vlan ip-subnet [ id <subnet_id> ]
show Show running system information
vlan VLAN status
ip-subnet Show VLAN ip-subnet entries
id Show a specific ip-subnet entry
Default:
N/A
Usage Guide:
To display the IP-based VLAN information.
Example:
To display the IP-based VLAN information.
Switch # show vlan ip-subnet
VCE ID IP Address Mask Length VID Interfaces
------ --------------- ----------- ---- ----------
1 192.168.78.0 24 5 GigabitEthernet 1/1
4.20.108 show vlan mac
Command:
show vlan mac [ address <mac_addr> ]
show Show running system information
vlan VLAN status
mac Show VLAN MAC entries
address Show a specific MAC entry
-379-