PLANET WGSW-48040HP - Manual (Page 188)

Command Guide of WGSW-48040HP
no
no Negate a command or set its defaults
Default:
N/A
Usage Guide:
To default the function.
Example:
To enable the function (description 999).
Switch# configure terminal
Switch (config)# ipmc profile planet
Switch (config-ipmc-profile)# no description 999
4.2.74.7 range
Command:
range <EntryName : word16> deny | permit
description Additional description about the profile
<EntryName : word16> Range entry name
deny Deny matching addresses
permit Permit matching addresses
Default:
Deny
Usage Guide:
To configure action of entry for specific IPMC Profile
Example:
To configure action (permit) of entry (1) for specific IPMC Profile (planet)
Switch# configure terminal
Switch (config)# ipmc profile planet
Switch (config-ipmc-profile)# range 1 permit
4.2.75 ipv6 mld host-proxy
-188-