PLANET WGSW-48040HP - Manual (Page 69)

Command Guide of WGSW-48040HP
Switch# configure terminal
Switch (config)# hostname planetbestswitch
planetbestswitch(config)#
4.2.45 interface * | GigabitEthernet
Command:
interface * | GigabitEthernet <port_type_list>
* All switches or All ports
GigabitEthernet 1 Gigabit Ethernet Port
Default:
N/A
Usage Guide:
To enter the interface mode.
Example:
To enter the interface GigabitEthernet 1/2
Switch# configure terminal
Switch (config)# interface GigabitEthernet 1/2
Switch (config-if) #
4.2.45.1 access-list action permit
Command:
access-list action permit
action Access list action
Default:
Permit
Usage Guide:
To configure Permit for the ACL action.
Example:
To configure Permit ACL action for the GigabitEthernet X/X.
Switch# configure terminal
-69-