PLANET WGSW-48040HP - Manual (Page 72)

Command Guide of WGSW-48040HP
Switch (config)# interface GigabitEthernet X/X
Switch (config-if) # access-list port-state
4.2.45.6 access-list rate-limiter
Command:
access-list rate-limiter <RateLimiterId : 1-16>
rate-limiter Rate limiter
<RateLimiterId : 1-16> Rate limiter ID
Default:
Disable
Usage Guide:
To apply Rate Limiter ID for the ACL.
Example:
To apply ACL Rate Limiter ID 1 for the GigabitEthernet X/X.
Switch# configure terminal
Switch (config)# interface GigabitEthernet X/X
Switch (config-if) # access-list rate-limiter 1
4.2.45.7 access-list redirect interface
Command:
access-list redirect interface 10GigabitEthernet <port_type_list> | GigabitEthernet
<port_type_list>
redirect Redirect frame to specific port
Default:
Disable
Usage Guide:
To redirect frames to specific Port.
Example:
To redirect GigabitEthernet X/X frames to GigabitEthernet 1/2.
-72-